Armanov Single Stage Conversion Kit for Dillon XL650/XL750

Quick Die Change

Armanov lock rings secure the die in place using an indexing spring plunger, allowing for quick and easy die changes by simply lifting the plunger tab. The floating action ensures precise alignment by allowing the dies to self-center over each cartridge, resulting in superior concentricity and more accurate ammunition.

Spent Primer Tray

The spent primer tray features a curved path to slow down and efficiently catch primers ejected with a spring-loaded decapping die, along with an overhang to prevent primers from falling off the tray, ensuring clean and reliable operation. When the tray is full, it's simple to take it out and discard the primers, or you can pick them up with your hands.

Stainless Steel Adapter Bolt

The adapter bolt features a 19 mm hex shape for easy tightening with a wrench and is compatible with all standard shell holders. It allows for quick changes by simply moving the rubber retainer to a lower position. The sloped primer exit ensures efficient spent primer removal. Additionally, you can leave the adapter on the press at all times, and it won’t interfere with the toolhead, enabling even faster conversion.

Simple Die Height Adjustment

The toolhead features an engraved scale for precise fine adjustments of the die, with increments of 0.05 mm or 0.002 inches. Simply mark a reference point on the die, then rotate it to adjust the length accurately, using the scale as a guide. When fine adjusting the die, there is no need to remove it form the holder as the lock ring bolt is accessible from the back opening.